Frequently Asked Question
FormWashCureUpdater
updates firmware for both the Form Wash and the Form Cure. To update firmware on a Form Wash or a Form Cure, connect the unit with a USB cable to a computer running the latest version of PreForm. Locate and run the FormWashCureUpdater
in the PreForm installation folder to check for firmware updates and to update the firmware. Update one unit at a time.
Note:
The FormWashCureUpdater
is included in installations of PreForm version 2.15.1 and later.
Windows instructions
- Install the latest version of PreForm.
- Locate and open the installed PreForm directory. The default path is
C:\Program Files (x86)\Formlabs\PreForm
. - Double-click the
FormWashCureUpdater.exe
file. TheFormWashCureUpdater
appears in a new window.- If Windows prompts you to allow the program to make changes, allow the changes to run the
FormWashCureUpdater
.
- If Windows prompts you to allow the program to make changes, allow the changes to run the
- Connect the Form Wash or the Form Cure to a power source.
- Connect the Form Wash or the Form Cure to the computer with a USB cable.
Notice:
Do not disconnect the USB or power cables during the firmware update.
- When the
FormWashCureUpdater
detects the your Form Wash or Form Cure, select Update Firmware. - The
FormWashCureUpdater
uploads the new firmware and restarts your Form Wash or Form Cure to complete the update. The update should take approximately 20 seconds.Note:
The turntable may rotate during firmware updates on the Form Cure.
- Firmware Up To Date appears next to the connected unit in the main updater window. Select Done once the update is complete.
- Repeat Steps 4–8 to update firmware on additional Form Wash or Form Cure units.
- Select Quit to close the
FormWashCureUpdater
.
macOS instructions
- Download and run the latest PreForm installer. The installer includes the PreForm application and the
FormWashCureUpdater
. - Drag the
FormWashCureUpdater
application file into the Applications folder. - Open the Applications folder and run the
FormWashCureUpdater
. - Connect the Form Wash or the Form Cure to a power source.
- Connect the Form Wash or the Form Cure to the computer using a USB cable.
Notice:
Do not disconnect the USB or power cables during the firmware update.
- When the
FormWashCureUpdater
detects your Form Wash or Form Cure, select Update Firmware. - The
FormWashCureUpdater
uploads the new firmware and restarts your Form Wash or Form Cure to complete the update. The update should take approximately 20 seconds.Note:
The turntable may rotate during firmware updates on the Form Cure.
- Firmware Up To Date appears next to the connected unit in the main updater window. Select Done once the update is complete.
- Repeat Steps 4–8 to update firmware on additional Form Wash or Form Cure units.
- Select Quit to close the
FormWashCureUpdater
.
Troubleshooting
Only attempt to troubleshoot or force a firmware update if the initial attempt fails.
Display freezes during firmware update
Unplug the Form Wash or Form Cure then reconnect to a power source if the screen freezes during a firmware update.
Restart with a power cycle
If the display freezes during or after the firmware update, power cycle your Form Wash or Form Cure.
- Unplug the unit.
- Wait at least ten seconds to ensure a complete power cycle.
- Reconnect the power cable to restart the unit.
- If updating the firmware on your Form Wash or Form Cure fails, try forcing an update or contacting Formlabs Support or your authorized reseller.
Firmware update fails
The display on a Form Wash or Form Cure typically goes blank and won’t turn back on if a firmware update fails.
Notice:
Do not daisy chain USB cords when updating the firmware on a Form Wash or Form Cure. This may result in the machine becoming inoperable.
Force a firmware update
Forcing an update should only be considered after a Form Wash or Form Cure fails to update. To force an update:
- Install the latest version of PreForm.
- Disconnect the Form Wash or Form Cure from its power source.
- Press and hold down the knob on the front panel of the unit.
- While holding down the knob, connect the Form Wash or Form Cure to a power source.
- Open and run the
FormWashCureUpdater
application file on your Windows or Mac computer. - Connect the Form Wash or the Form Cure to the computer using a USB cable.
- On Windows, the Device Manager application should show the connected USB device as Wash (DFU) or Cure (DFU).
- On macOS, the System Information application should show the connected USB device as Wash (DFU) or Cure (DFU).
- When the
FormWashCureUpdater
detects the Form Wash or Form Cure, select Update Firmware. - The
FormWashCureUpdater
uploads the new firmware and restarts the Form Wash or Form Cure to complete the update. The update should take approximately 20 seconds.
Note:
Forcing a firmware update on a Form Wash or Form Cure after daisy chaining USB cords may bring the unit back online.